Atlas never made a sticker sheet for the TV & Radio Tower slot car racing trackside structure kit.
Posts Tagged ‘tv & radio tower’
1410 Atlas HO Slot Car Racing Trackside Structure TV & Radio Tower Sticker Sheet
Saturday, April 10th, 20101410 Atlas HO Motoring TV & Radio Tower Slot Car Racing Structure Box Lid
Thursday, April 1st, 2010The overall dimensions of this box is 7.5 inches wide by 5.5 inch tall by 2.0 inches deep.
Atlas HO Motoring TV Radio Tower Slot Car Racing Structure 1410-98
1410 Atlas HO Slot Car Racing Track Layout TV & Radio Tower Structure Left
Sunday, March 21st, 2010
1410 Atlas HO Slot Car Racing Track Layout TV & Radio Tower Structure Rear
Sunday, March 21st, 2010
1410 Atlas HO Slot Car Racing Track Layout TV & Radio Tower Structure Right
Sunday, March 21st, 2010
1410 Atlas HO Slot Car Racing Track Layout TV & Radio Tower Structure
Saturday, March 20th, 2010Your atlas model 1410 tv & radio tower should be erected beside one of the turns on your track or, if your track is fairly elaborate, at some difficult to negotiate location where the action usually stays exciting. You’ll be able to keep your TV and radio personnel at their posts by means of a false sense of security if you stack a substantial pile of atlas hay bales between the track and the tower. Otherwise everyone aboard the tower is apt to join the birds each time one of the cars loses its grip and comes sliding in at it.
1410 Atlas HO Slot Car Racing Track Layout TV & Radio Tower Structure
Atlas HO Model 1410-98 TV & Radio Tower Assembly Instructions
Wednesday, March 3rd, 2010- Install the four tubular columns 1 on base 2 by pressing each of the columns into one of the base lugs.
- Line up the holes in one of the platforms 3 with the tops of the columns then carefully slide the platform downwardly until it is about 3/8 inch above the base.
- Install the two remaining platforms on the columns leaving the uppermost platform flush with the column upper ends. Adjust the center platform along the columns to a position midway between the upper and lower platforms. If you wish the platforms may now be permanently fixed to the columns with a small dab of model airplane cement on the platform under-surfaces.
- Determine the correct length for the ladder 4 by installing it temporarily. After marking the length remove the ladder and carefully cut off the excess. The ladder may now be cemented into the base and against the top rail of each platform.
- Install TV camera 5 and cameraman 6 on the uppermost platform, the microphone 7 and announcer 8 on the center platform. Cement a small piece of paper over the opening on the rear of the TV monitor 9 then install it and the director 10 on the lower platform.
Atlas HO Slot Car Racing Track Layout Scenery 1410 TV & Radio Tower Assembly Instructions
HO Slot Car Motoring Accessory Set 1401-595 Landau
Monday, February 22nd, 2010After you designed and built your HO slot car track layout you needed some scenery to enhance it. You could purchase individual model kits and accessories to accomplish this task. Atlas also condensed and repackaged all of their scenery into two large accessory sets and named them the Landau & Grand Prix. The Landau set was comprised of the Bleachers Stand, 24 Figures, Officials Stand, Refreshment Stand, TV & Radio Tower, 4 Hedges & 12 Bales of Hay. If you, the hobbyist, intended to buy all of these structures & accessories separately purchasing the Landau HO Motoring Accessory Set 1401-595 provided a better value as it saved you almost 11% over the individual retail prices. The overall dimensions of the box is 18 inches long by 14 inch wide by 2 inches tall.
HO Slot Car Layout Accessories 1413-69 12 Bales Of Hay
Saturday, February 20th, 2010With just a few packages each of the bales of hay you will be able to quickly add some very attractive touches of authenticity to your motor raceway. Generally speaking, the hay bales are located along the turns where a spectator area is located. The hay bales should be stacked in front of any track side structure such as an Officials Stand or a TV & Radio Tower and also between the track and your Grandstands. The hay bales protecting the grandstand spectators should be arranged in a fairly orderly straight line with an occasional bale knocked out of alignment. In front of the other buildings the bales look best if not too uniformly arranged. Technically speaking, each one of these beautifully molded scenery sections are a hay bale bundle each consisting of 12 hay bales. Each fulvous colored hay bale bundle is soft and pliable and measure 1-5/8 inches long by 3/8 inch tall by 1/2 inch wide at the base and tapers to 7/16 inch at the top.
Atlas HO Slot Car Racing Track Layout Accessories 12 Bales Of Hay
HO Scale Slot Car Structures Box End Panel Graphics
Wednesday, February 17th, 2010Part of the allure to collecting vintage Atlas buildings is the colorful graphics that each box displays. If you are investing in a complete set of these HO 1/87 scaled structures for your slot car layout you get an added value bonus of looking at a box with colorful artwork & graphics. Listed here again is all of the vintage HO motoring & racing plastic model scenery kits which were produced along with their original stock numbers and price.
- 1402-129 Grandstand
- 1403-98 Bleacher Stand
- 1404-89 Entrance Building
- 1405-89 Rest Room
- 1406-89 First Aid Station
- 1407-98 Refreshment Stand
- 1408-129 Pit Stop
- 1409-129 Official’s Stand
- 1410-98 TV & Radio Tower
Colorful box artwork is typical for the period and Atlas made no exception as you can see from this image of the side panels.
Atlas HO Slot Car Racing Plastic Model Building Kit Box End Panel Graphics