Posts Tagged ‘roof’
Monday, May 3rd, 2010
A. Assembly Of Station Building
- Locate and cement, from the inside, WINDOWS and DOORS to openings in WALLS.
- Cement END WALLS to FRONT WALL. NOTE: END WALLS are interchangeable so that END WALL with FREIGHT DOOR may be placed either on the LEFT or the RIGHT.
- Cement REAR WALL to END WALLS.
- Locate and cement WALL ASSEMBLY to BASE WALK.
- Locate and cement FRONT ROOF and REAR ROOF to WALLS.
- Locate and cement FRONT GABLE ROOF HALVES to FRONT GABLE.
- Locate and cement REAR GABLE ROOF HALVES to REAR GABLES.
- Locate and cement ROOF EXTENSION SUPPORTS to CORNERS of WALLS.
- Locate and cement FRONT and REAR ROOF EXTENSIONS to FRONT and REAR WALLS.
- Cement SIDE ROOF EXTENSIONS to SIDE WALLS.
- Locate and cement RAIN GUTTERS to ROOF EXTENSIONS.
- Locate and cement (2) DOWN SPOUTS to GUTTERS and WALLS.
- Cement (2) LIGHT FIXTURES at TOP of DOORWAYS.
- Cement (2) STATION SIGN BOARDS to underside of SIDE ROOF EXTENSIONS.
- Cement CHIMNEY HALVES together.
- Locate and cement CHIMNEY to ROOF.
- Cement CHIMNEY CAP to CHIMNEY.
- Locate and cement PACKING CASES and TRUNKS to WALK in front of FREIGHT DOOR of STATIONS. Set aside to dry.
B. Assembly Of Waiting Platform
- Locate and cement ROOF SUPPORT POSTS to PLATFORM FLOOR.
- Cement FRONT and REAR ROOF SECTIONS to ROOF SUPPORT POSTS.
- Cement SIDE ROOF SECTIONS to FRONT and REAR ROOF SECTIONS.
- Locate and cement (2) BENCHES to center of PLATFORM FLOOR.
- Cement RAIN GUTTERS to underside of ROOF.
- Locate and cement DOWN SPOUTS to ROOF SUPPORT POSTS and RAIN GUTTERS.
- Cement (2) LIGHT FIXTURES to inside of ROOF SUPPORT POSTS.
- Cement WEIGHT SCALE POST and PLATFORM SECTIONS together.
- Locate and cement WEIGHT SCALE to one end of PLATFORM FLOOR.
- Locate and cement SUITCASE and HAT BOX to PLATFORM FLOOR.
Tags: 656, assembly, aurora, gable, HO, instructions, platform, railroad, roof, station, waiting
Posted in Aurora Model Motoring HO Slot Car Racing | No Comments »
Sunday, February 28th, 2010
- Cement shelves 1 and coffee urns 2 to base 3.
- Cement stools 4 to the base.
- InstallĀ counter walls 5 on the base.
- Apply printed signs to roof signs 6 then cement the roof signs to the columns of the counter wall.
- Install roof 7 and smoke jack 8.

Atlas HO Slot Car Racing Track Layout Scenery 1407 Refreshment Stand Assembly Instructions
Tags: 1407, assembly, Atlas, base, coffee urns, counter walls, HO, instructions, model, refreshment stand, roof, roof signs, shelves, smoke jack, stools
Posted in Atlas HO Slot Car Racing | No Comments »
Tuesday, February 23rd, 2010
- Before beginning assembly apply all the decorative stickers as called for in the second sketch below.
- Install the roof trusses 1 on base 2. There are two left hand trusses and two right hand trusses each of which is molded with its cross members recessed on one side and flush on the opposite. All trusses should be installed with their flush side facing the steps at the center of the base. The trusses are installed as follows: Hold a truss on an angle as shown in the first sketch below, then insert the offset lug at the bottom of the long column between the third and fourth boards from the bottom. Similarly, insert the lug of the middle column between the sixth and seventh boards from the bottom. Then rotate the truss to vertical and carefully slide it into its location allowing the small lug at the bottom of the rear column to drop into its respective hole.
- Install roof 3.
- Apply pennants to poles of signboard 4 then install the signboard on the roof.
- Cement loudspeakers 5 into small loops on signboard. Turn the loudspeakers so that they face slightly away from each other.

Atlas HO Slot Car Racing Track Layout Scenery 1402 Grandstand Assembly Instructions
Tags: 1402, assembly, Atlas, grandstand, HO, instructions, loudspeakers, model, pennants, roof, signboard, stickers, trusses
Posted in Atlas HO Slot Car Racing | No Comments »