platform « SlotCarChitChat.com

Posts Tagged ‘platform’

Monday, May 3rd, 2010

A. Assembly Of Station Building

Locate and cement, from the inside, WINDOWS and DOORS to openings in WALLS.
Cement END WALLS to FRONT WALL. NOTE: END WALLS are interchangeable so that END WALL with FREIGHT DOOR may be placed either on the LEFT or the RIGHT.
Cement REAR WALL to END WALLS.
Locate and cement WALL ASSEMBLY to BASE WALK.
Locate and cement FRONT ROOF and REAR ROOF to WALLS.
Locate and cement FRONT GABLE ROOF HALVES to FRONT GABLE.
Locate and cement REAR GABLE ROOF HALVES to REAR GABLES.
Locate and cement ROOF EXTENSION SUPPORTS to CORNERS of WALLS.
Locate and cement FRONT and REAR ROOF EXTENSIONS to FRONT and REAR WALLS.
Cement SIDE ROOF EXTENSIONS to SIDE WALLS.
Locate and cement RAIN GUTTERS to ROOF EXTENSIONS.
Locate and cement (2) DOWN SPOUTS to GUTTERS and WALLS.
Cement (2) LIGHT FIXTURES at TOP of DOORWAYS.
Cement (2) STATION SIGN BOARDS to underside of SIDE ROOF EXTENSIONS.
Cement CHIMNEY HALVES together.
Locate and cement CHIMNEY to ROOF.
Cement CHIMNEY CAP to CHIMNEY.
Locate and cement PACKING CASES and TRUNKS to WALK in front of FREIGHT DOOR of STATIONS. Set aside to dry.

B. Assembly Of Waiting Platform

Locate and cement ROOF SUPPORT POSTS to PLATFORM FLOOR.
Cement FRONT and REAR ROOF SECTIONS to ROOF SUPPORT POSTS.
Cement SIDE ROOF SECTIONS to FRONT and REAR ROOF SECTIONS.
Locate and cement (2) BENCHES to center of PLATFORM FLOOR.
Cement RAIN GUTTERS to underside of ROOF.
Locate and cement DOWN SPOUTS to ROOF SUPPORT POSTS and RAIN GUTTERS.
Cement (2) LIGHT FIXTURES to inside of ROOF SUPPORT POSTS.
Cement WEIGHT SCALE POST and PLATFORM SECTIONS together.
Locate and cement WEIGHT SCALE to one end of PLATFORM FLOOR.
Locate and cement SUITCASE and HAT BOX to PLATFORM FLOOR.

Wednesday, March 3rd, 2010

Install the four tubular columns 1 on base 2 by pressing each of the columns into one of the base lugs.
Line up the holes in one of the platforms 3 with the tops of the columns then carefully slide the platform downwardly until it is about 3/8 inch above the base.
Install the two remaining platforms on the columns leaving the uppermost platform flush with the column upper ends. Adjust the center platform along the columns to a position midway between the upper and lower platforms. If you wish the platforms may now be permanently fixed to the columns with a small dab of model airplane cement on the platform under-surfaces.
Determine the correct length for the ladder 4 by installing it temporarily. After marking the length remove the ladder and carefully cut off the excess. The ladder may now be cemented into the base and against the top rail of each platform.
Install TV camera 5 and cameraman 6 on the uppermost platform, the microphone 7 and announcer 8 on the center platform. Cement a small piece of paper over the opening on the rear of the TV monitor 9 then install it and the director 10 on the lower platform.