- Locate and cement DOOR HINGES to GARAGE DOOR.
- Locate and cement HINGE SOCKETS to sides at GARAGE DOOR OPENING.
- Allow cemented DOOR HINGES and HINGE SOCKETS to dry for about five (5) minutes and then assemble DOOR to OPENING by inserting HINGES into HINGE SOCKETS.
- Locate and cement FRONT DOOR to OUTSIDE of FRONT WALL of HOUSE.
- Locate and cement WINDOW WALL to FRONT WALL from the inside.
- Similarly, locate and cement, from the inside PICTURE WINDOW, LATTICE WINDOW and SMALL WINDOWS to FRONT WALL.
- Locate and cement GARAGE DOOR and WALL ASSEMBLE to RIGHT SIDE of FRONT WALL.
- Locate and cement LEFT END WALL to LEFT SIDE of FRONT WALL.
- Locate and cement GARAGE END WALL to FRONT and REAR WALL.
- Locate and cement REAR WALL to LEFT END WALL and to GARAGE INSIDE WALL.
- Locate and cement GARAGE REAR WALL to GARAGE INSIDE WALL and to GARAGE DOOR OPENING.
- Locate and cement ROOF (3) PARTS to HOUSE.
- Locate and cement GABLE HALVES together.
- Locate and cement TRIANGULAR PANEL to FRONT of GABLE.
- Locate and cement GABLE ASSEMBLY to ROOF.
- Locate and cement CHIMNEY HALVES together and cement to ROOF.
- Cement CHIMNEY CAP to CHIMNEY.
- Cement CUPOLA HALVES together and cement to GARAGE ROOF.
- Cement CUPOLA ROOF to CUPOLA.
- Cement (16) SHUTTERS to SIDES of WINDOWS.
- Locate and cement (6) WINDOW BOXES underneath WINDOWS of LEFT END WALL and FRONT and REAR GARAGE WALLS.
- Locate and cement RAIN GUTTERS to underside of ROOF OVERHANG.
- Locate and cement DOWN SPOUTS to GUTTERS and WALLS.
- Cement WEATHER VANE to CUPOLA ROOF.
- Cement TV ANTENNA to POLE and cement to side of CHIMNEY.
Posts Tagged ‘cupola’
Aurora HO Model 653-98 Ranch House Assembly Instructions
Friday, April 30th, 2010Atlas HO Model 1409-129 Officials Stand Assembly Instructions
Tuesday, March 2nd, 2010- Before beginning assembly apply all decorative stickers called for on the drawing.
- Install inner wall 1 in building 2. Make sure the upper corners of the inner wall are inserted between the small tabs at the ends of the longitudinal building brace.
- Install the building on base 3 so that the opening in the base lies between the inner and rear walls. Make certain that the lower corners of the inner wall enter between the small centering ribs on the base.
- Install awning 4 with its upper edges resting on the framing around the counter window opening. The upper edges of the awning sides snap under the small pin protruding from the sides of the building.
- Install upper storey 5 and windows 6.
- Install roof 7 and cupola 8.
- Cement loud speakers 9 into gutters at the roof corners.
- Apply a pennant to pole 10 and then cement the pole into the hole in the cupola.
Atlas HO Slot Car Racing Track Layout Scenery 1409 Officials Stand Assembly Instructions
HO Slot Car Structure 1409-129 Officials Stand
Monday, February 15th, 2010An officials stand (sometimes called a judges stand or viewing stand) is a small stand alone building at the side of the track where track officials (or referees) can officiate (or judge) what happens during the race. The location of the stand is usually central to where the action is so that a clear view of all areas of the track can be seen at all times by eye or with field glasses or binoculars. Drivers can be penalized by disqualification and/or fining based upon violating any of the homologated racing and safety rules. Clear styrene plastic viewing windows surround the building 360 degrees and a tall fragile white flag pole extends 4 inches above the roof. Four (4) large speakers are attached at the corners of the roof so that official announcements can be heard by all fans and pit crews. The Atlas officials stand measures 4.0″ x 4.0″ x 7.0″ and displays nicely on any HO scale slot car racing track layout. This kit is relatively easy to assemble.
Atlas HO Scenery Slot Car Racing Track Layout Plastic Model Officials Stand Building Kit