Tuesday, March 2nd, 2010
- Before beginning assembly apply all decorative stickers called for on the drawing.
- Install inner wall 1 in building 2. Make sure the upper corners of the inner wall are inserted between the small tabs at the ends of the longitudinal building brace.
- Install the building on base 3 so that the opening in the base lies between the inner and rear walls. Make certain that the lower corners of the inner wall enter between the small centering ribs on the base.
- Install awning 4 with its upper edges resting on the framing around the counter window opening. The upper edges of the awning sides snap under the small pin protruding from the sides of the building.
- Install upper storey 5 and windows 6.
- Install roof 7 and cupola 8.
- Cement loud speakers 9 into gutters at the roof corners.
- Apply a pennant to pole 10 and then cement the pole into the hole in the cupola.
Atlas HO Slot Car Racing Track Layout Scenery 1409 Officials Stand Assembly Instructions
Tags: 1409, assembly, Atlas, awning, cupola, HO, instructions, model, officials stand, pennants, stickers, storey
Posted in Atlas HO Slot Car Racing | No Comments »
Monday, February 15th, 2010
An officials stand (sometimes called a judges stand or viewing stand) is a small stand alone building at the side of the track where track officials (or referees) can officiate (or judge) what happens during the race. The location of the stand is usually central to where the action is so that a clear view of all areas of the track can be seen at all times by eye or with field glasses or binoculars. Drivers can be penalized by disqualification and/or fining based upon violating any of the homologated racing and safety rules. Clear styrene plastic viewing windows surround the building 360 degrees and a tall fragile white flag pole extends 4 inches above the roof. Four (4) large speakers are attached at the corners of the roof so that official announcements can be heard by all fans and pit crews. The Atlas officials stand measures 4.0″ x 4.0″ x 7.0″ and displays nicely on any HO scale slot car racing track layout. This kit is relatively easy to assemble.
Atlas HO Scenery Slot Car Racing Track Layout Plastic Model Officials Stand Building Kit
Tags: awning, binoculars, cupola, judges stand, officials stand, rules, storey, styrene, window
Posted in Atlas HO Slot Car Racing | No Comments »