- Locate and cement DOOR HINGES to GARAGE DOOR.
- Locate and cement HINGE SOCKETS to sides at GARAGE DOOR OPENING.
- Allow cemented DOOR HINGES and HINGE SOCKETS to dry for about five (5) minutes and then assemble DOOR to OPENING by inserting HINGES into HINGE SOCKETS.
- Locate and cement LEFT END WALL to LEFT SIDE of LOWER FRONT WALL.
- Locate and cement, from the inside, (2) PICTURE WINDOWS to FRONT WALL.
- Locate and cement LEFT END WALL to LEFT SIDE of LOWER FRONT WALL.
- Locate and cement GARAGE INSIDE WALL to RIB on inside of FRONT WALL between WINDOW and GARAGE DOOR.
- Locate and cement REAR WALL to LEFT END WALL and to GARAGE INSIDE WALL.
- Locate and cement GARAGE END WALL to FRONT and REAR WALL.
- Locate and cement UPPER FRONT WALL to SIDE WALLS.
- Locate and cement SUN DECK over GARAGE END of HOUSE.
- Locate and cement CHIMNEY to LEFT END WALL.
- Locate and cement CHIMNEY SMALL SECTION to UPPER PART of CHIMNEY.
- Locate and cement CHIMNEY CAP to CHIMNEY.
- Locate and cement ROOF to HOUSE.
- Locate and cement SUN DECK RAILING (3 Sections) to SUN DECK.
- Locate and cement (2) TRELLISES to GARAGE END WALL.
- Locate and cement (12) WIDE SHUTTERS to sides of FRONT and REAR SECOND STORY WINDOWS.
- Locate and cement (10) NARROW SHUTTERS to sides of WINDOWS in END WALLS.
- Locate and cement (2) DOOR CANOPIES over BACK DOORS.
- Locate and cement (2) FRONT DOOR LIGHTS alongside FRONT DOOR.
- Locate and cement RAIN GUTTERS to underside of ROOF OVERHANG.
- Locate and cement DOWN SPOUTS to GUTTERS and WALLS.
- Locate and cement FRONT DOOR STEP to FRONT WALL.
- Locate and cement BACK DOOR STEP and PATIO to BACK WALL.
Posts Tagged ‘assembly’
Aurora HO Model 652-98 Colonial House Assembly Instructions
Thursday, April 29th, 2010Aurora HO Model 651-79 Plastic Tree Assembly Instructions
Wednesday, April 28th, 2010Instructions for assembling all plastic trees:
- Tree top has peg on underside.
- Branch next to top has hole straight through.
- All other branches have pegs on top and hole on other side.
Aurora HO Slot Car Racing Track Layout Scenery 651 Plastic Tree Assembly Instructions
Atlas HO Model 1410-98 TV & Radio Tower Assembly Instructions
Wednesday, March 3rd, 2010- Install the four tubular columns 1 on base 2 by pressing each of the columns into one of the base lugs.
- Line up the holes in one of the platforms 3 with the tops of the columns then carefully slide the platform downwardly until it is about 3/8 inch above the base.
- Install the two remaining platforms on the columns leaving the uppermost platform flush with the column upper ends. Adjust the center platform along the columns to a position midway between the upper and lower platforms. If you wish the platforms may now be permanently fixed to the columns with a small dab of model airplane cement on the platform under-surfaces.
- Determine the correct length for the ladder 4 by installing it temporarily. After marking the length remove the ladder and carefully cut off the excess. The ladder may now be cemented into the base and against the top rail of each platform.
- Install TV camera 5 and cameraman 6 on the uppermost platform, the microphone 7 and announcer 8 on the center platform. Cement a small piece of paper over the opening on the rear of the TV monitor 9 then install it and the director 10 on the lower platform.
Atlas HO Slot Car Racing Track Layout Scenery 1410 TV & Radio Tower Assembly Instructions
Atlas HO Model 1409-129 Officials Stand Assembly Instructions
Tuesday, March 2nd, 2010- Before beginning assembly apply all decorative stickers called for on the drawing.
- Install inner wall 1 in building 2. Make sure the upper corners of the inner wall are inserted between the small tabs at the ends of the longitudinal building brace.
- Install the building on base 3 so that the opening in the base lies between the inner and rear walls. Make certain that the lower corners of the inner wall enter between the small centering ribs on the base.
- Install awning 4 with its upper edges resting on the framing around the counter window opening. The upper edges of the awning sides snap under the small pin protruding from the sides of the building.
- Install upper storey 5 and windows 6.
- Install roof 7 and cupola 8.
- Cement loud speakers 9 into gutters at the roof corners.
- Apply a pennant to pole 10 and then cement the pole into the hole in the cupola.
Atlas HO Slot Car Racing Track Layout Scenery 1409 Officials Stand Assembly Instructions
Atlas HO Model 1408-129 Pit Stop Assembly Instructions
Monday, March 1st, 2010- Important! Before beginning assembly apply all the decorative stickers as called for on the drawing.
- Install inner wall 1 in building 2. Make sure the upper corners of the inner wall are inserted between the small tabs at the ends of the longitudinal brace.
- Install the building on base 3 making certain that the lower corners of the inner wall are received between the small centering tabs on the base. The building front should face toward the wide ground area of the base.
- Install roof 4.
- Apply pennants to the poles on roof signs 5 then cement the sign to the roof.
- The following details may be arranged on the base to suit your fancy: air compressor 6, welding rig 7, tire rack 8, frame jack 9, drum with pump 10, bumper jack 11, water can 12, elevated drum 13, plain drum 14.
Atlas HO Slot Car Racing Track Layout Scenery 1408 Pit Stop Assembly Instructions
Atlas HO Model 1407-98 Refreshment Stand Assembly Instructions
Sunday, February 28th, 2010- Cement shelves 1 and coffee urns 2 to base 3.
- Cement stools 4 to the base.
- Install counter walls 5 on the base.
- Apply printed signs to roof signs 6 then cement the roof signs to the columns of the counter wall.
- Install roof 7 and smoke jack 8.
Atlas HO Slot Car Racing Track Layout Scenery 1407 Refreshment Stand Assembly Instructions
Atlas HO Model 1406-89 First Aid Station Assembly Instructions
Saturday, February 27th, 2010- Before beginning assembly apply all the decorative stickers called for on the drawings. Important! The two signboards 6 are not interchangeable. Apply the FIRST AID STATION sign to the signboard which has the small locating lug nearest the end of the signboard.
- Cement the fire extinguishers 1 on building 2 as shown. Check the drawings to be sure you get the correct side.
- Cement a bench 3 on each side of the building.
- Install the building on base 4.
- Install roof 5.
- Install roof signs 6.
- Apply the red cross flag to the pole on siren 7 then cement the siren into roof cavity.
- Install tank 8, stretcher 9 and oxygen tanks 10.
Atlas HO Slot Car Racing Track Layout Scenery 1406 First Aid Station Assembly Instructions
Atlas HO Model 1405-89 Rest Room Assembly Instructions
Friday, February 26th, 2010- Before beginning assembly apply all the decorative stickers called for on the drawing.
- Install building 1 on base 2.
- Install the left and right hand blinder panels 3 as shown with the small lugs facing downwardly and with the shorter end panel of each blinder next to the door.
- Install roof 4.
- Apply pennants to poles 5 at the same time determining the location of each pole so that the pennants will all flutter in the same general direction; then cement the poles into the gutters at the roof corners.
- Install vents 6.
Atlas HO Slot Car Racing Track Layout Scenery 1405 Rest Room Assembly Instructions
Atlas HO Model 1404-89 Entrance Building Assembly Instructions
Thursday, February 25th, 2010- Before beginning assembly apply all the decorative stickers called for on the drawing.
- Install building 1 on base 2.
- Cement the two turnstiles 3 in place.
- Install the four short picket fences 4. Note that there are two left hand and two right hand fences which should be installed as shown in the drawing. Install the two long picket fences 5.
- Install roof 6.
- Apply pennants to poles on roof signs 7. Determine proper location for each sign then apply the pennants so that they all appear to flutter in the same general direction. Cement the signs to the roof gutters as shown.
- Install the loudspeaker 8.
Atlas HO Slot Car Racing Track Layout Scenery 1404 Entrance Building Assembly Instructions
Atlas HO Model 1403-98 Bleacher Stand Assembly Instructions
Wednesday, February 24th, 2010- Apply the decorative stickers as called for on the drawing below.
- Apply pennants to the four poles.
- Cement poles into small holes along uppermost plank.
Atlas HO Slot Car Racing Track Layout Scenery 1403 Bleacher Stand Assembly Instructions